Masonry restoration in Compton CA - old brick walls that keep their face
Crumbling joints, stained brick or a wall that's starting to let go? We repoint and clean it gently so the brick lasts.
What does masonry restoration on an old brick wall involve?
Masonry restoration in Compton brings an old brick or stone wall back into working shape, mostly by repointing, where we cut out the worn mortar in the joints and pack in new, and by cleaning the face without wearing it down.
Usually you notice sandy mortar falling out of the joints, a few loose bricks or dark stains, and by then water is getting in where it shouldn't. The price moves with how much of the wall needs its joints cut out, how high we have to work and how much cleaning the face needs, and the schedule turns on the same things plus a permit if your job needs one. If the brick around an old fireplace is part of the trouble, I'll look at that too, or we can talk about fireplace installation if it's past saving. Your own figure comes from the written estimate I put together after seeing the wall.
Why homeowners pick us for masonry restoration
You get the owner on site, a repair matched to your building, and nothing harder or bigger than the job needs. That's how we work on brick, block and stone.
I write every estimate
I come out to look at your wall myself and write the estimate, so the person pricing it knows the work.
Our own masons, checked
Our own crew of masons does the work, and I'm on site checking the joints as they go.
In Compton since 2017
I learned the trade on masonry crews and started this business in Compton in 2017.
Licensed and fully insured
We're licensed and fully insured, so you aren't carrying the risk of a crew working on your walls.
A straight answer first
Call (562) 232-8311 and I'll tell you plainly whether your wall needs restoring or just a smaller repair.
Masonry restoration work for your wall
Which of these your house needs depends on what's failing, how soft the brick is and how far the damage runs, and I'd rather start small than overdo it.
Ask about restoring your brick
Call (562) 232-8311 or ask for an estimate, with the wall's height, rough size and photos of worn joints ready.
Trusting R&S Compton Concrete and Masonry with masonry restoration
I start by finding what's causing the damage, because new mortar won't last over a leak or a downspout dumping water on the wall. Then we start with the gentlest cleaning that works and test a small spot first, since harsh blasting takes the face off the brick along with the dirt.
The repair has to suit the building, so we match the mortar to your brick and use nothing harder or bigger than the job needs. If a wall is too far gone, I'll say so, and we can talk about rebuilding it or stone veneer installation instead. Satisfaction guaranteed.
Masonry restoration questions from Compton
How much does it cost to repoint a brick wall in Compton?
Repointing brick across the US usually costs about $3 to $25 per square foot, according to one national cost guide. Taller walls that need scaffolding cost more per square foot than shorter ones, and since that range is national, your own figure comes from the estimate I write after seeing the wall.
How do I choose the right mortar for old brick?
If your brick is soft, ask for a mortar that lets moisture dry out of the wall, because mortar is meant to wear first and protect the brick. One preservation guide shows a wall where hard portland cement mortar let less moisture through than the soft brick around it, trapped water and caused severe damage.
What is the best way to restore an old brick wall?
Get the mortar joints sound and the building watertight before any water cleaning starts, because preservation guidance says even gentle water methods can damage old masonry. So on most walls the repointing comes first and the cleaning comes after.
Can sandblasting or chemical cleaning damage brick?
Yes, grit blasting, grinders and sanding discs usually take some of the brick surface off along with the dirt or paint. Water-based methods are generally the gentlest, and some cleaning solutions react with minerals in brick and can cause or worsen stains, so ask for a test on a small area first.
Who is allowed to do masonry restoration in California?
In most cases a licensed contractor, because the California Contractors State License Board requires a license when the job needs a building permit, uses added workers, or costs $1,000 or more in labor and materials. An unlicensed person can only take a job under $1,000 that needs no permit and where they employ no one.
How long does mortar last before a brick wall needs repointing again?
One national cost guide says brick and stone mortar needs repointing every 25 to 30 years. If your joints were last done around then, or nobody knows when, that span is a fair way to plan the next round.
What happens when you call about masonry restoration in Compton?
Every job is planned around your wall and your schedule, so I look first, explain what I found, and nothing starts until you've read the estimate and said go.
Call or write
Call (562) 232-8311 or use the form, tell us about the wall, and I'll set a time to come out.
I look at the wall
I come out myself, check the joints, the brick and the face, and find what's actually causing the damage before talking about any fix.
Your written estimate
I write the estimate myself, and you take whatever time you need with it before deciding whether to go ahead.
The work and walk-through
Once you say go, we handle any permit, our crew does the work with me checking it, and we walk the finished wall together.
Masonry restoration in Compton and nearby cities
Compton Building and Safety issues permits for repairs to existing buildings, so I check whether your restoration needs one and we pull it if it does. We work from Compton across Lynwood, Paramount and nearby cities, so pick yours below.
Ask R&S for a masonry restoration estimate
Catching loose joints early usually means fewer bricks to reset, so call (562) 232-8311 or send the form while it's still a small job.